What Should We Notice in Replacing Grain mill Sieve

What should we notice in replacing grain mill sieve?

Grain mill sieve plays an important role in corn processing. But the sieve may be easily worn after long term of usage. In this case, we should take measures to replace the grain mill sieve in time.

Now, let’s introduce the replacing method and attentions of grain mill sieve:
First, dismantle the grain mill net rack, put the sieve surface downward, and put it in PU loop.

Second, install sealing rubber strip around the grain mill sieve.

Third, install the sieve assembly and put it flat on the sieve bottom border of the grain mill.

Fourth, dismantle the middle frame and push the sieve gently and evenly. The discharging outlet of the grain mill sieve frame can be put on the suitable place along with the peripheral direction according to the need.

Fifth, pave the fine sieve on the vibrating sieve evenly.

Sixth, pull the surrounding sieve of the vibration sieve high and remove the surplus parts. Fasten the clamp and lock the copper nut with open spanner. During locking process, we can use the rubber hammer to knock the surrounding place of the clamp evenly.

The above is about the operation process and attentions of the replacement of the grain mill sieve.